Product Manual: Storemasta Outdoor Lithium-ion Battery Store

Prior to Installation 

• The outdoor battery store can be lifted by crane (using lifting lugs x 4 on roof) or forklift using fork pockets in base only.   
• Make sure the store does not contain batteries, chargers or equipment when it’s being installed or relocated.   
• All doors and maintenance panels need to be secured and locked. The spill sump must be completely empty and cleaned out prior to the store being relocated.  
• Keep the store properly restrained for safe transport and positioning at your site.  
• Scan the warranty registration QR code (or enter the link into your browser) and complete the Storemasta warranty application form.  

Positioning 

• Position the outdoor battery store in the required location. The location of your store should be segregated from incompatible substances and away from boundary lines and protected places.  
• Configure the perforated shelving to suit your requirements. To adjust, simply lift up the shelf from the lugs, which are inserted into the cabinet interior wall. Put the lugs in the new position and place the shelf securely on top.   
• Choose a flat, stable concrete surface for the store to be installed on. The surface must be capable of holding the weight of the filled battery store.  
• Ensure all base plates are adequately supported.  
• The intake and outlet must be positioned at least 400-500mm away from any walls or structures.  
• If there is vegetation at the site, make sure that it is kept short and away from the store. The fresh air intake and vents must always be kept clear.  
• Ensure you position the store in line with segregation rules (generally 3-5 metres from other dangerous goods or flammable substances, depending on incompatibility of chemicals), and distancing from protected and public places. We recommend at least a 3 metre exclusion zone to protect people, property and other equipment onsite. 
• Adjust the charging points to suit your battery charging requirements.  
• Plug the store into the power socket  

It’s a good idea to have installation and operating procedures for your Storemasta lithium-ion battery store already in place, so staff can be trained to install and use it correctly.  

 Electrical 

• The outdoor battery store is a fully wired solution, so it requires a single phase electrical connection onsite. Dependant unpon the HVAC system of your unit, electrical connections may vary.   
• Electrical power supply and installation should be performed only by a licensed electrician in compliance with local, state and national electrical code.   
• The electrical installation must be explosion protected within the hazardous area.  
• Isolate power elsewhere prior to opening any electrical enclosure or motor.   

Mechanical  

• Ensure grounding of equipment supplied is installed as per manufacturers specifications and according to the appropriate national or regulatory standards.  
• Read all instruction manuals, tags and labels before operating this equipment.  
• Ensure condensate drain P trap is maintained.  
• The return air and supply air grilles must be always kept clear to maintain air flow.  
• Care should be taken to prevent short circuiting of condensing air stream.   

Ensure your site is ready for the installation. Our DG Consultants are happy to guide you on the installation prepration.

Maintenance 

• Ensure a qualified electrician inspects and tags the equipment every 12 months. 
• Clean the battery store with a dry cloth regularly and keep the fan clean from debris. 
• Check the signage is visible and intact so staff are aware of the hazards within the store – this includes a CLASS 9 diamond and LITHIUM-ION BATTERY sign. 

For further details on pre-start checks, installation and maintenance that are specific to your Storemasta Outdoor Lithium-ion Battery Store, see the Installation, Operation and Maintenance Manual provided upon purchase.  

Download Product Manual PDF

Get in touch:  

Need some more advice on the installation or use of your lithium-ion battery cabinet? It’s easy to get in touch with our Storemasta team. Simply send your enquiries to sales@storemasta.com.au or give us a call on 1300 134 223.    

Further resources:   

Click on the below links for more information about the storage of lithium-ion batteries in the workplace:

• 10 Ways to Improve Safety with Lithium Battery Storage
• Fire Suppression and Lithium-ion Batteries
• Safety Tips for Charging Li-ion Batteries