Assessing the risks and dangers of the chemical hazards at your workplace is a critical step in safety management. Chemical hazards can cause fires, explosions, asphyxiation, burns and respiratory damage (as well as environmental pollution) and therefore you have to get it right. This blog introduces you to the chemical risk assessment and explains how to prioritise the chemical hazards which need immediate attention at your workplace. We’ll explain how we do it here at STOREMASTA, share the details of the methodology we’ve developed and invite you to use it in your workplace.
TIP: Download our free eBook free eBook How to manage the risk of Hazardous Chemicals in the workplace to understand the full risk management process.
Before you can begin a risk assessment you must identify and document all the chemicals present at your workplace. You’ll create a list which will become the basis for all your future risk management activities. It should contain the following information:
We realise this is an extensive list, but you’ll need all this information to consider all the possible chemical incidents or accidents that could occur at your workplace
TIP: Read our blog How to identify chemical hazards in the workplace which explains this process in more detail.
Once you’ve documented the necessary information about the chemical hazards, you need to think about what type of incidents, accidents or emergencies they could cause. Here are a few examples …
Chemical Hazard | Possible Incident |
|
|
|
|
|
|
|
|
Unless you have a very small organisation, it’s unlikely you’ll be able to implement control measures that address every chemical hazard immediately. In order to decide what must be done first you need to calculate the level of risk. This is done by looking at a combination of two factors:
The consequences are the possible deaths and injuries as well as structural, property and environmental damage. Here at STOREMASTA we give the consequences of a chemical incident a score out of 5. So a small fire that could be contained onsite causing no structural damage would have a lower score than a chemical explosion that required emergency services and destroyed a building.
When considering the likelihood you need to investigate how often a chemical is handled, what safety procedures are currently in place, and what incidents have already occurred. Again, we rate the likelihood of an chemical incident out of 5. With incidents that could occur more than once a year given the highest score.
Each hazard is ultimately given a risk score out of 10, with the highest risks given the highest priority. That’s your risk assessment done.
REMEMBER: A risk assessment only examines the extent of risk to people, environment, property and equipment. You still need to implement control measures.
Risk assessment is just one of four essential steps for managing the chemical hazards at your workplace. In order to meet your WHS obligations in Australia you need to identify, assess and control every chemical hazard at your workplace. You must then periodically review the hazards and sustain your compliance.
For this reason we’ve developed an easy-to-follow methodology that can be used at any workplace containing hazardous chemicals. Our methodology guides you through each of the four steps and provides you with a set of practical tools and templates to get the job done.
REMEMBER: risk assessment is only one of four essential steps in complete risk management. 100% compliance with Australian WHS legislation cannot be guaranteed unless all four steps are undertaken.
We encourage you to use our methodology to control the chemical hazards at your workplace. This chemical management methodology is outlined in our free eBook How to manage the risk of Hazardous Chemicals in the workplace. Why not download it now?
You will have instant access to:
Download and read it today by clicking on the image below: