Knowing how to store and handle gas bottles properly is so important for the safety of your staff and organisation. Gas bottle safety includes vigilant handling, storage and maintenance to ensure there are no physical or physiochemical hazards when working with gas cylinders or gas bottles.
Gas cylinders should be retested and stamped every 10 years, with dented, damaged or corroded gas cylinders tested again to ensure safety. Heat and ignition sources, such as naked flames, must always be kept away from these dangerous goods. Strict controls and procedures need to be put in place to make sure your team are protected when working with these cylinders.
In this post, we share our 5 best tips for gas bottle safety in the workplace, so you can stay safe and comply with WHS legislation.
TIP: For more information about storing and handling gas cylinders safely at work, download our free eBook Gas Cylinder Storage: compliance and safety requirements.
Most gas cylinders have long, slim designs and can easily fall or be knocked over. You must ensure that gas bottles are always upright and restrained with straps or chains just above the cylinder’s midpoint — and tight enough so they can’t slip off.
Cylinders should always be unloaded or transferred using gas cylinder handling equipment. Gas cylinders can be moved with mechanical lifting devices (eg, forklifts) or gas bottle trolleys that keep the cylinder upright and securely restrained.
Using gas cylinder handling equipment also prevents workers from:
When in use, cylinders should be secured on a gas bottle trolley that has hose hook, ratchet strap, and enclosed sides. Maintenance and welding work should be done so that cylinders are protected from possible impact from vehicles and falling objects.
REMEMBER: Compressed gases can easily leak when they are being used or transported. If you need to transport gas bottles in a vehicle or around your worksite, you should avoid doing so in an enclosed vehicle as the gases could accumulate and create a hazard.
When gas cylinders aren’t being used, they should be stored securely in a gas bottle cage. Each cylinder should be stored upright and individually restrained with a safety strap or chain. Make sure your gas bottle or cylinder storage offers adequate ventilation to avoid physical, chemical or physiochemical hazards, such as fire or asphyxiation due to escaped gases.
Gas cylinder storage, like our Industrial Gas Cage, should meet the requirements of the Australian Standard.
Gas cylinder valves should be closed, and attachments or gas appliances disconnected then removed. Cylinders should also have safety caps in place.
IMPORTANT: A suitable trolley or lifting device shall be used for moving cylinders in an upright manner, with the cylinders securely restrained, and in a manner that cannot cause damage to the valve. Section 5.2.1 (o)(ii) AS 4332.
Compressed gases are classed as hazardous chemicals and must be segregated according to their hazard classification and kept away from incompatible substances.
According to the Australian Standard, the gases listed below (flammable, toxic and oxidising gases) must be segregated from each other by at least 3 metres.
More specifically, the following segregation rules apply to your gas cylinder stores:
The segregation can also be achieved by installing a non-combustible wall at least 1 metre higher than the tallest cylinder. The wall must be impervious to gas vapours.
IMPORTANT: Areas in which cylinders are kept shall be clear of combustible materials, vegetation and refuse, for a distance of not less than 3 metres from any cylinder. Section 5.2.1 (d) ii) AS 4332.
Empty cylinders still contain residual gas and are vulnerable to ruptures and gas leaks. They must be treated in exactly the same way as if they were full.
Make sure your empties are labeled correctly and separated from full cylinders. Empty cylinders must also be segregated according to their hazard class.
You must store empty cylinders in a compliant gas cage, to ensure they don’t pose risk to your organisation.
IMPORTANT: All cylinders are regarded as full unless gas-freed by the manufacturer or not containing a valve. Section 1.1 AS 4332.
Gas cylinders have a dangerous history of involvement in skylarking and pranks (particularly by new workers and young people). AS 4332 - The storage and handling of gases in cylinders requires that gas bottle cages are fenced and otherwise secured to prevent untrained and unauthorised people accessing cylinders. Gases stored in the lab can be particularly vulnerable.
Apart from the examples listed below, untrained staff or contractors who don’t understand the full dangers of the gases stored onsite, may inadvertently use or handle a cylinder incorrectly. This could lead to their own death from asphyxiation, exposure to toxic and corrosive gases, or a catastrophic fire and explosion.
Below is a table of examples of how hazardous gases may be misused.
Example of how hazardous gases are misused |
||
Helium |
Inhaling gas to make your voice sound funny. |
Despite being depicted as cool on TV and in movies, inhaling helium displaces oxygen in the lungs the same way as drowning. It’s very easy to die from asphyxiation. |
O2 |
Pure oxygen intended for medicinal use and first aid, is often misused as a ‘hangover cure’. |
Apart form oxygen toxicity, breathing pure oxygen under pressure can cause lung damage. Pure O2 is extremely flammable and misuse could also cause fires/explosions. |
N2O (Laughing Gas) |
Laughing gas is often misappropriated and used as a recreational drug. |
Nitrous oxide is an anaesthetic gas that is addictive and habit forming. Breathing N2O can cause immediate asphyxiation or impair workers, rendering them unable to safely perform their duties in the workplace. |
Misusing cylinders |
Dispensing gas to propel things. |
The sudden release of any gas under pressure can easily kill a person. |
IMPORTANT: Cylinders shall not be used for any purposes other than those for which they were designed. Section 5.2.1 (f) AS 4332—2004
Make sure your gas cylinder stores have compliant and clear signage, including mandatory placards. Gases of different hazard classifications will each require a different dangerous goods label.
Required warning signs and placards for stores holding gas cylinders include:
Mandatory placards should be placed outside the storage area, and far enough away to adequately warn someone of the gas hazards before they enter the cylinder store. Signage must be permanently installed and unable to be moved or transferred.
REMEMBER: Every premises on which gases are kept shall be placarded in accordance with regulatory requirements. Section 6.4 AS 4332.
If you need a full understanding of the legal requirements surrounding gas bottle safety at your workplace, download our free eBook Gas Cylinder Storage: Compliance and safety requirements. We outline the risks and hazards of storing and handling compressed gases as well as a methodology for introducing safe storage and handling control measures. Download it now by clicking on the image below.