Incidents from hazardous chemicals have shut down whole towns, decimated coastlines and cost the lives of thousands of workers from all over the world. And while the impact of these incidents is felt far beyond the worksite where they have occurred, it’s regrettable to note that most of these incidents could have been prevented. To control the risk of incidents such as fires, chemical spills and human harm, it’s vital that workplaces develop a system that effectively manages the risks posed by onsite hazardous chemicals.
In this post, we’ll be introducing our 4-step methodology, so you can understand how to control chemical hazards. The Storemasta Chemical Management Methodology is an easy-to-follow system which is proven to reduce chemical risk — and improve workplace safety.
IMPORTANT: Successful chemical management is not a finite process. It’s an ongoing system that manages the risks posed by hazardous substances, so businesses can actively improve health and safety in the workplace. Understanding how to prevent chemical hazards is essential for safety and compliance.
To prevent incidents involving hazardous substances in the workplace, you must first be aware of the health and physiochemical hazards that are present — before implementing and maintaining measures to ensure that these hazards are controlled.
Our chemical management methodology is segmented into 4 clear steps which are designed to enable chemical hazard prevention. These steps are:
We’ll walk you through each of these steps so you can apply the same principles in your own organisation.
The first step to preventing chemical incidents is to clearly identify:
From here you can identify the hazards and begin a chemical risk assessment.
TIP: A good way to make sure you don’t overlook any chemical hazards in your workplace is to use a floor plan of your premises and mark all the locations where hazardous chemicals are present.
The risk assessment must systematically include each of the hazards you identified in Step 1.
Your risk assessment will consider:
TIP: As you carry out these risk assessments on the different locations where hazardous substances are stored in your workplace, it’s important to keep track of all the data in a central location. Our free eBook How To Manage The Risk Of Hazardous Chemicals In The Workplace includes a Risk Management Matrix Template. Download it now.
Controlling the chemical hazards at your workplace has two elements. First, engineering a safe workplace, job design, storage areas, and safety cabinets so staff are using, handling and storing all chemicals safely. And secondly, ensuring site personnel are alert, trained, and ready for accidents and emergencies — this includes having the necessary equipment (think PPE, firefighting gear, safety showers).
Control measures may include:
Even though you must control every risk and hazard identified, it’s practically impossible to do them all at once. Therefore, control measures should be prioritised according to the greatest amount of risk upon people, the property and the environment.
You must prioritise the chemical hazards that pose the greatest amount of risk.
Once you’ve implemented control measures you should conduct another risk assessment to make sure you haven’t introduced new hazards into the workplace. A good example of this might be substituting a chemical for something ‘less harmful’ to workers — only to discover the new chemical is incompatible to another substance on site. Now, you have invertedly created a new explosive hazard that must be controlled immediately.
TIP: Our free eBook introduces the Hierarchy of Control as a means of creating a safer workplace through the control of chemical hazards. Our eBook explains how to use the Hierarchy of Control method to comply with the WHS legislation in your state or territory.
To SUSTAIN chemical safety and compliance at your workplace you need a system to ensure that Hazard Identification and Risk Assessment is reviewed periodically.
We strongly recommend that you promptly conduct a risk assessment when:
Workplace risk management should never be considered finished. You should think of chemical risk control as an ongoing commitment to safety and compliance. As things in your workplace change, so will your control measures — such as the installation of new storage equipment or the provision for emergency decontamination equipment.
When changes occur in your business, you will have to reassess your chemical hazards and implement controls to reduce any new risks.
Therefore, once you have completed the 4 steps of our methodology, you’ve finished the first cycle of the system – but this is just the beginning of your risk control journey.
TIP: Don’t forget that sometimes control measures introduce new hazards to the workplace, so always conduct a new risk assessment on each individual control measure at your site.
Incident reports, sick leave records, minutes from safety meetings and supplier invoices can all be used to assist with your onsite safety improvements. These documents can give you information and clues as to which chemical hazards require immediate attention so that further workplace incidents can be prevented.
In the next section of this post, we’ll look at how you can review these documents to help you improve workplace health and safety.
If there is a serious workplace incident, accident or near-miss, you must complete an incident report and submit it to the Regulator in your state or territory.
Examples of notifiable chemical incidents include:
However, it’s also considered best practice to complete a report for less serious workplace incidents and accidents. Even though these incident reports don’t need to be submitted to the Regulator, they are a useful tool when kept as part of your safety records.
These workplace incidents might include:
By reviewing incident reports, you can expose chemical hazards that have arisen due to incorrect work processes, inadequate PPE, missing placards and signage, training inadequacies or lack of supervision.
This allows you to promptly rectify the issues at your site which are causing harm to your staff, supervisors or contractors.
If workers use hazardous chemicals on a regular basis (or in a confined space), the level of exposure may produce chronic health problems in the long term.
Regularly review sick leave records to detect any of the following patterns:
Be aware of any unusual patterns or incidents that are apparent in your sick leave records, as this may indicate a chemical hazard that's not been detected.
You may be able to determine an existing chemical hazard if you are acutely aware of the health and safety of your staff – and any unusual or concerning patterns that may emerge in the sick leave records.
REMEMBER: Individual workers who repeatedly require medical attention or are off work due to illness may require formal health monitoring.
Safety meetings and toolbox talks are excellent platforms for workers and staff to report recurring incidents and safety concerns. However, sometimes complaints or excuses made by staff can be discounted as unimportant. Situations such as: “Joe never puts away the paint”, may be more complex that first thought. Perhaps Joe can’t put away the paint because the flammable liquids cabinet is already at capacity or the doors of the cabinet aren’t opening properly.
REMEMBER: Sometimes the issues raised in safety meetings are not given the full attention they deserve, so it’s important to review minutes and records to expose unseen chemical hazards.
Incident, accident and near miss reports are only useful if they are actually filled out and submitted to management.
Despite being obliged to file certain incident and safety reports, sometimes workers don’t complete them because they are afraid of getting into trouble.
Here are a few ways that invoices submitted to the accounts department can indicate chemical hazards that have slipped under your guard:
REMEMBER: By following the 4-step risk management methodology and keeping a close eye on your reports and records, you can create a circular system where you’re minimising the likelihood of workplace incidences.
Whether you’re eliminating the risk of toxic chemicals spilling out into the natural environment, or you’re controlling harmful vapours emitted from your stores of corrosive chemicals, our 4-step methodology will help you identify, assess and control your chemical hazards, as well as sustain safety and compliance.
Now you know more about the Storemasta Chemical Management Methodology, are you ready to implement it into your own business? To find out more, we recommend you download our FREE eBook How To Manage The Risk Of Hazardous Chemicals In The Workplace. We’ll show you how to follow our step-by-step guide and action plan, so you can help prevent incidents from hazardous chemicals occurring at your workplace.